DEFENDER2.NET - View topic - head lamp adjustment

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > head lamp adjustment

Page 1 of 1

Print this entire topic ·

kljw

Member Since: 23 Jan 2009
Location: Edinburgh
Posts: 265

2009 Defender 90 Puma 2.4 SVX Soft Top Auto Santorini Black

head lamp adjustment

hi all
need to adjust the level of one of the headlamps, can anyone tell me what i should be looking for as an adjuster please. there is no self leveling on my puma. Cheers
keith
puer claudius

3rd Apr 2009 1:20pm

Grockle

Member Since: 24 Nov 2008
Location: Peak District National Park
Posts: 2266

2008 Defender 90 Puma 2.4 XS CSW Tonga Green

Keith, there are 2 adjusting screws for each located on the rim.why do you need to adjust them ? 2.4 90 XS
1968 1/32 scale Britains 109 Pick up.

3rd Apr 2009 1:34pm

kljw

Member Since: 23 Jan 2009
Location: Edinburgh
Posts: 265

Grockle
the right side is higher than the left, and is quite noticable. i have just had a HID light conversion done, so maybe they have just been knock out of alignment. not big problem, just need to know what i am looking for, hate to turn the wrong thing so to speak.

Also, do you acees the adjuster from inside the engine compartment or exteranaly? Cheers
keith
puer claudius

3rd Apr 2009 1:43pm

Grockle

Member Since: 24 Nov 2008
Location: Peak District National Park
Posts: 2266

I'm sure if look at the head light the 2 screws are visible bottom one for vertical the other for horizontal adjustment.line it up to the correct light in front of a wall etc. 2.4 90 XS
1968 1/32 scale Britains 109 Pick up.

3rd Apr 2009 2:40pm

kljw

Member Since: 23 Jan 2009
Location: Edinburgh
Posts: 265

Grockle,
thanks for that, they are now in line, and are very bright! Cheers
keith
puer claudius

7th Apr 2009 12:13pm

Grockle

Member Since: 24 Nov 2008
Location: Peak District National Park
Posts: 2266

Good,glad to have been of help, Keith you prob know that they are illigal without auto dip and washers. 2.4 90 XS
1968 1/32 scale Britains 109 Pick up.

7th Apr 2009 1:07pm

kljw

Member Since: 23 Jan 2009
Location: Edinburgh
Posts: 265

hi,
yes i was, but have adjusted the lights low, so as not to cause problems to other uses. also, looking into some form of washer setup for the main lights. not a legal solution, but steps in the correct direction. Cheers
keith
puer claudius

7th Apr 2009 1:59pm

Grockle

Member Since: 24 Nov 2008
Location: Peak District National Park
Posts: 2266

Pete as BAS was looking into them. 2.4 90 XS
1968 1/32 scale Britains 109 Pick up.

7th Apr 2009 2:18pm

kljw

Member Since: 23 Jan 2009
Location: Edinburgh
Posts: 265

i know, have rwead his post and seen the pictures he posted, hence why i had mine converted. Cheers
keith
puer claudius

8th Apr 2009 6:00pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum